Quick Tip April 28, 2016

Quick Tip Header Image


BOB-CAT ProCat and Predator-Pro mowers offer multiple positions for
steering control levers to be mounted, which aid in operator comfort.

Control Levers

To adjust, simply follow the instructions below:
There are two mounting positions for the control levers, upper and lower.
The lower position works well for most people. Taller operators may need
the upper position.

To adjust the height of the control levers:
– Remove bolts A and nuts B
– Align holes in control lever D with appropriate holes in traction lever bracket C.
– Install bolts A and nuts B.

The upper mounting hole for the control levers is slotted to allow fore-aft
adjustment and to allow alignment of the levers.

To adjust or align the control levers:
– Loosen nuts B
– Adjust control lever position.
– Tighten nuts B.


If you have any questions on the above BOB-CAT features, please refer to
the operator’s manual or bobcatturf.com for more information, or contact
BOB-CAT Customer Service toll-free at 866-469-1242.