ProCat Side View
Engine Make Displacement
Kawasaki® FX651V 726 cc [44.3 cu. in.]
Kawasaki® FX730V 726 cc [44.3 cu. in.]
Kawasaki® FX801V 852 cc [51.9 cu. in.]
Kohler® EC730 EFI NEW 725 cc [44.2 cu. in.]
Kawasaki® FX730V 726 cc [44.3 cu. in.]
Kawasaki® FX801V 852 cc [51.9 cu. in.]
Kawasaki® FX801V 852 cc [51.9 cu. in.]
Kohler® ECV749 EFI NEW 725 cc [44.2 cu. in.]
Kawasaki® FX801V 852 cc [51.9 cu. in.]
Deck Size Blade Tip Speed Blades
48" SD 18,000 fpm 3 - 16" High Lift Offset .250" thick
52" SD 18,404 fpm 3 - 18" High Lift Offset .250" thick
52" SD 18,404 fpm 3 - 18" High Lift Offset .250" thick
52" SD 18,404 fpm 3 - 18" High Lift Offset .250" thick
61" SD 18,809 fpm 3 - 21" High Lift Offset .250" thick
61" SD 18,809 fpm 3 - 21" High Lift Offset .250" thick
61" RD 18,809 fpm 3 - 21" Mulching Offset .250" thick
61" SD 18,809 fpm 3 - 21" High Lift Offset .250" thick
72" SD 18,770 fpm 3 - 25" High Lift Offset .250" thick
Deck: 

Deck Design: DuraDeck™ fabricated, formed and welded 10-gauge, reinforcements of 10-gauge, 7-gauge, and 3-gauge. Reinforced front lip and trim side. Patented Double-Wave Baffle System increases lift for a better cut.

Discharge: On side discharge models, oversize molded rubber chute controls airflow to improve clipping dispersal

Deck Skirts: 7-gauge Skirts

Anti-Scalp Rollers: Up to 7 adjustable anti-scalp rollers on front and rear

Spindle Type: Maintenance Free w/1" Shaft

Bearings: Double-sealed, precision ground ball bearings

Cutting Height: 1 inch – 5.5 inches in ¼ inch increments

Deck Lift Type: Manual hand lift with spring assist / RH or LH Quick Lift Foot Lift Pedal

Deck Drive: Warner Mag Stop 225 ft. lb. electric clutch

Ground Speed
11.5 mph
11.5 mph
11.5 mph
11.5 mph
11.5 mph
11.5 mph
11.5 mph
11.5 mph
11.5 mph
Drive: 

Transmission: Twin Hydro-Gear™ variable displacement pumps with hydraulic oil cooler and Parker wheel motors

Pump Size: 12cc

Front Tires Rear Tires Brake
13 x 5.50-5 No-Flat caster wheels 23 x 8.50-12 4-ply Drum
13 x 6.50-6 No-Flat caster wheels 23 x 10.50-12 4-ply Drum
13 x 6.50-6 No-Flat caster wheels 23 x 10.50-12 4-ply Drum
13 x 6.50-6 No-Flat caster wheels 23 x 10.50-12 4-ply Drum
13 x 5.50-5 No-Flat caster wheels 24 x 12.00-12 4-ply Drum
13 x 6.50-6 No-Flat caster wheels 24 x 12.00-12 4-ply Drum
13 x 6.50-6 No-Flat caster wheels 24 x 12.00-12 4-ply Drum
13 x 6.50-6 No-Flat caster wheels 24 x 12.00-12 4-ply Drum
13 x 6.50-6 No-Flat caster wheels 24 x 12.00-12 4-ply Drum
Fuel: 

Fuel Capacity 14 Gallons

Hour Meter Digital hour meter with service minder for engine oil and filter, engine air filter and hydraulic oil and filter

Machine Weight/ Wet Machine Length Machine Height
(with ROPS down)
1230 lbs 82" 49"
1256 lbs 82" 49"
1256 lbs 82" 49"
1256 lbs 82" 49"
1293 lbs 82" 49"
1293 lbs 82" 49"
1293 lbs 82" 49"
1293 lbs 82" 49"
1404 lbs 82" 49"
Size: 

All ProCat models standard with folding ROPS.

Seat: 

Seat: B-C Lounger High Back with Full Vibration Isolation - Fore and Aft adjusters - Quick Adjust Armrests

Superior Ride Comfort with ISO-Ride™ and Custom Operator Zone. Custom operator zone adjusts easily for a comfortable ride and makes BOB-CAT® a perfect fit for any operator. The custom operator zone also provides maximum control with minimal effort.
. Elastomeric fabric seat suspension to isolate vibration and absorbs shock for a better all-day ride.
. Elastomeric radial bearings isolate against shock and vibration
. Vibration isolators help prevent fatigue and numbness in feet and legs
. Operator position lowered by 2" to provides a table center of gravity, better visibility, and improved traction and handling
. Motion control lever design yields more legroom and provides smoother control
. Adjustable armrests are a perfect fit for any size
. On-the-fly tracking allows fine-tuning for easy straight line operations